[ OBD-1 P07 PROGRAMS ]

The VTEC-E P07 is a unique ECU, mainly because it's designed to be used with a a 5-wire 02 sensor. There are 2 types of P07 ECU's. Both are reprogrammable, but both with internal design. One of the versions is more 'chipper friendlier' than the other.This chipper friendlier version is actually a P28 in disguised with VX programming and a VX part number (P07).

A way to check and see if you have the chipper or unchipper friendly P07, is simple. Remove ecu top cover and look for this board number:

If your P07 has the board number shown above (02D01560-1500), it is the unfriendly version which I do not support for reprogramming at this time.

However, if your P07 ECU has either of these board numbers:

02D011F0-1500 or 02D01720-1500

You have the chipper friendly version which i support for reprogramming.

If you have an eligible P07 and are wondering about programming, programs can be found under the P28 & P30 program categories. The chipper friendly P07 is fully compatible with any of the SOHC & DOHC VTEC programs I have available under those categories.

© 2004-2005 www.ff-squad.com. All rights reserved